Skip to content
Walter Maker Labs
guide

InfiMech MX Kickstarter on November 10: what to know first

· updated on

The InfiMech MX campaign opens on November 10, a week before Formnext. Prices, Super Early Bird slots, and how to avoid backing it blind.

This time there’s a date: the Kickstarter for the InfiMech MX series opens on 10 November 2026. It’s on InfiMech’s official homepage (“Launching on Kickstarter Nov 10”), with a button that leads to the campaign’s pre-launch page. I checked it on 5 November.

It’s the fourth announced window. The first three (June, late September, late October) all slipped, and I covered the third delay in InfiMech delays again: 7 free upgrades. The difference is that this time it isn’t a window, it’s a specific day.

Update, 8 November: the campaign’s pre-launch page now shows the warranty, the delivery roadmap, the add-ons, the full spec sheet for both machines and the eSUN partnership. You’ll find them in the sections below. The video covers them too (in Italian, with chapters).

The prices, and what you actually pay

MX (6 toolheads) MX Pro (8 toolheads)
Super Early Bird at launch $299 $549
With the $5 VIP deposit $249 $499
List price $399 $1,399

The campaign page puts it this way: VIP “Pay $5 for VIP Access, Get $50 Cashback”, Super Early Bird “No deposit required”. So you can claim a Super Early Bird slot without a deposit.

The $249 and $499 figures that have been around since August aren’t a price you see at checkout. The $5 VIP deposit buys a $50 credit, paid back as cashback after the campaign closes. So on 10 November you pay $299 or $549, and the $50 comes back later.

And there’s a condition that matters more than the deposit: Super Early Bird slots are limited, and InfiMech hasn’t said how many there are. It allocates them based on VIP reservations and production capacity. If you’re late, you don’t pay $299 or $549: you pay the next tier, which hasn’t been published yet.

InfiMech doesn’t publish prices in euros or pounds: exchange rate, shipping and VAT will only show up on the campaign page.

Launch time: InfiMech sends it by email to VIP deposit holders, shortly before launch and ahead of the public alert.

The calendar problem: Formnext comes after

Formnext, the Frankfurt 3D printing trade show, runs from 17 to 20 November. InfiMech has confirmed the MX Pro will be there.

In my piece on the delay I called Formnext the objective test: if the Pro prints in front of people, the explanation for the delays holds up. But the calendar puts things in the wrong order. Super Early Bird slots are claimed on 10 November. The Pro is seen running from the 17th. If you wait for Formnext to decide, the best slots will very likely be gone.

How to have both

On Kickstarter you don’t pay when you pledge: your card is charged only when the campaign closes, and until then you can lower or cancel your pledge. The one limit is the final 24 hours: then Kickstarter won’t let you cancel if pulling out would drop the project below its goal.

So if you’re seriously interested in the MX Pro:

  1. On 10 November, claim a Super Early Bird slot.
  2. From 17 to 20 November, watch what happens at Formnext: whether the Pro actually prints, and how.
  3. Before the campaign closes, decide. If the Pro isn’t in Frankfurt, or it’s there but switched off, cancel the pledge and you’ve paid nothing.

There’s one condition: the campaign has to run past 20 November. You’ll only see its length on the 10th, on the campaign page. Hardware campaigns usually stay open for weeks, but check: if it closed before Formnext, this plan no longer works.

The roadmap: deliveries from Q1 2027

The campaign page lays out the project’s history and the next milestones:

When Milestone
July 2024 Project kickoff (codename F04)
November 2024 First prototype, 10 units
May 2025 Pilot run V2.0, 20 units
September 2025 Official names: MX and MX Pro
December 2025 Public debut at the Dubai exhibition, 50 units in testing
May 2026 Global beta with creators
September 2026 Pilot production, 200 units
November 2026 Kickstarter
December 2026 Mass production
Q1 2027 First batch shipped to backers

Two things to read carefully. Mass production is planned one month after the campaign opens: that’s a tight schedule for a project that has already moved its launch three times. And “first batch” doesn’t mean every backer: if you join later in the campaign, your machine may come later.

Warranty and support

Coverage Length
Structural, mechanical and electronic components 12 months, 2 years where legally required (EU and UK)
VIP reservation holders 2-year full warranty on core components
Wear parts (hotend assembly, extruder gear, PTFE tube) 3 months

The page also lists a “6-month limited warranty” without saying what it covers: worth asking InfiMech during the campaign.

What matters most is the service method: “Official replacement parts shipped directly to users”, meaning they send you the part and you fit it. There’s no repair centre to send the printer to. On a toolchanger with six or eight heads, that means sooner or later you’ll be taking a head apart yourself.

The add-ons

During the campaign you’ll be able to add to your pledge: spare toolhead, build plate, feeder module, filament, 10 W laser module, camera and side-blower fan.

Prices aren’t published yet. The spec sheet below does make clear who they’re for:

eSUN and the giveaways

InfiMech has announced a partnership with eSUN, one of the most widespread filament brands, with InfiMech × eSUN co-branded filaments. During the campaign they promise giveaways and daily rewards: eSUN filaments and eSUN discount coupons. Rules, schedule and how to enter will be published at launch.

Full spec sheet: MX vs MX Pro

This is the table published on the campaign page. InfiMech calls it provisional and subject to change until the machine ships.

MX Pro MX
External dimensions 453 × 488 × 563 mm 361 × 401 × 402 mm
Build volume 300 × 300 × 300 mm 220 × 220 × 220 mm
Weight 26 kg 13 kg
Frame Steel, enclosed Steel, open
Toolheads 8 6
Max nozzle temperature 350 °C 310 °C
Motors Closed-loop Open-loop
Max speed 800 mm/s 600 mm/s
Max acceleration 20,000 mm/s² 20,000 mm/s²
Bed 110 °C, textured plate 110 °C, textured plate
Heated chamber 60–65 °C No
Air filter HEPA and activated carbon No
Camera 1080p 30 fps, standard Optional
AI monitoring Yes No
Side-blower fan Standard Optional
Laser module Optional Not available
Max power 1,850 W at 220 V (1,300 W at 110 V) 1,150 W at 220 V (700 W at 110 V)

Shared: HRC50+ hardened steel nozzles, induction heating, wireless thermistor, 1.75 mm filament, adaptive calibration, blob, run-out and tangle detection, power-loss recovery, plate detection, 5” screen (480 × 854), 8 GB storage plus microSD, OrcaSlicer or InfiMech Orca, operating temperature 10–30 °C.

Materials. The Pro prints PLA, PETG, ABS, ASA, TPU, PET, PA and PC, plus carbon- or glass-filled grades (PLA, PETG, ABS, ASA, PA, PA6, PA12, PAHT, PPA, PET). The MX is meant for PLA, PETG, TPU, PVA, PLA-CF and PETG-CF; ABS, ASA, PA, PC and PET are not recommended.

What I take from the table:

What’s still to be confirmed

I’ll update this article on 10 November with what’s actually on the page.

Where I stand

What I said last time still holds. The MX at $299 ($249 after cashback) is the cheapest toolchanger ever offered: if you can afford to see that money arrive late, the balance between risk and upside is in your favour. For the Pro, it’s the plan above: take the slot, decide after Formnext.

A word on crowdfunding: backing a campaign means funding a product into existence, not buying it. Pledges are charged when the campaign closes regardless of progress, and recovering money from failed projects is rare. Only commit amounts you're comfortable seeing arrive late, or not arrive at all.


I don’t own this printer, I haven’t printed on it, and I’m not sponsored by InfiMech. This is an analysis of public information.

Earlier episodes: the first look at the MX, the real number on filament waste and the third delay and the seven upgrades.