3D Printing
FDM and resin printers tested in the workshop: real print quality, profiles that actually work, and the problems press releases leave out.
- guide
InfiMech MX Kickstarter on November 10: what to know first
The InfiMech MX campaign opens on November 10, a week before Formnext. Prices, Super Early Bird slots, and how to avoid backing it blind.
- guide
InfiMech delays again: 7 free upgrades, but one isn't confirmed
A third Kickstarter delay and seven free upgrades for backers. What each one changes on the machine, and which of the seven is still only under evaluation.
- troubleshooting
Anycubic Kobra 3: the most common errors and their fixes
Error 10122, error 11511, a clogged hotend and ACE Pro lockups: the faults I actually hit on the Kobra 3 Combo, with the fix that worked each time.
- troubleshooting
Anycubic Kobra X: warping and corners lifting off the bed
Corners peeling up from the plate? Why it happens in winter, what draughts have to do with it, and the quickest fix to save the print.
- troubleshooting
Snapmaker U1: common errors and how to fix them
Axis movement anomaly, jammed filament and bad prints blamed on moisture: the real problems on the U1 and the fixes that actually worked.
- guide
InfiMech MX Pro: the real number on filament waste
How much filament a toolchanger actually throws away at each colour change, the figure measured on the MX Pro, and when the Kickstarter opens.
- guide
InfiMech MX: the cheapest toolchanger ever offered
A toolchanger at a price that simply didn't exist before. What the InfiMech MX promises, where the cost is being cut, and what still has to be proven.
- guide
Flashforge Creator 5 Pro: does it really beat the Bambu X2D?
The Creator 5 Pro positions itself against the X2D. A comparison on volume, speed, multicolour and price to work out which one actually makes sense.
- review
Anycubic Kobra X: unboxing, setup and first prints
A first full test of the Kobra X: assembly, calibration and the quality of the early prints, including the problems hit during setup.
- tutorial
Snapmaker U1: 10+ colours without an AMS, here's how
A toolchanger can go past the limits of an AMS. How to set up a print with more than ten colours, and what it costs you in time and attention.
- guide
Anycubic ACE 2 Pro: is the upgrade worth it?
ACE 2 Pro against the previous generation: what genuinely changes in multicolour handling, and whether the trade-in is worth the money.
- review
Anycubic Kobra X: what I really think, uncomfortable truths
Anycubic answered the community's hardest questions about the Kobra X in a Reddit AMA. What each answer actually means once you're printing every day.
- troubleshooting
Snapmaker U1: what you only find out after a month
The flaws that only surface with daily use: what jams, what needs recalibrating, and what no first-day review can possibly tell you.
- review
Snapmaker U1: unboxing, assembly and first toolchange print
From the box to the first multicolour print: how long it takes to build, what was in the box, and how it copes on the very first attempt.














