Skip to content
Walter Maker Labs
review

Makera Z1 Pro unboxing: what's in the box and first impressions

I unboxed the Makera Z1 Pro Founder Edition: everything in the box, the kit for making PCBs at home, how it's built and what you get if you buy one today.

The Makera Z1 Pro has arrived. It’s my first CNC, and I opened it on camera: this article lists everything that was in the box, package by package, with what each part is for explained for people coming from 3D printing. The machine doesn’t get switched on here: the milling tests come in the next videos.

Disclosure: I paid for the Z1 Pro myself, as a Kickstarter backer. The PCB Fab Kit you’ll see further down, on the other hand, is something I asked Makera for as support for my PCB content, and they included it. Makera didn’t see the video before it went out and didn’t ask me to say anything. I also asked them for a discount code, which you’ll find at the end.

At a glance

Version Makera Z1 Pro Founder Edition (Kickstarter 2025)
Work area 20 × 20 cm bed, parts up to 10 cm tall
Build die-cast aluminium
Weight over 20 kg: lifting it is a two-person job
Shipping 76 days, from China to Italy by way of Africa
Packaging excellent, no damage
Extras in the box ionizer module, materials kit, PCB Fab Kit

76 days in transit

I backed the Z1 Pro on Kickstarter among the last, on 8 May. Shipping took far longer than planned: in August it was loaded onto one of the largest container ships in the world, which came back to its departure port two days later because of typhoons. The shortest route to Europe was closed, so the ship sailed around Africa to Rotterdam, and the parcel reached Italy from there. All in all, 76 days of shipping.

If you have a Z1 on the way and it feels late, that’s almost always why: the shipping routes, not Makera.

How it’s packed

Well, and I say that without reservations. Moulded foam, each accessory in its own box, silica gel against moisture, and the quick start guide even explains how to lift the machine out of the box: not a small detail with a machine of over 20 kg. The parcel is big, bulky and above all heavy. If you can, open it with a second person.

On top of the machine you’ll find the contents list, a safety guide, the quick start guide and some stickers.

The machine

If you come from 3D printing, the first thing that strikes you is the weight. A printer, even a big one, is light by comparison: the Z1 Pro is die-cast aluminium, and as soon as you lift it you know you’re dealing with something built to work.

Build quality, to the eye and to the touch, is excellent. How much that matters, the milling will tell.

The tool kit (what everyone gets)

This is the box that ships with every Z1, including one you buy today. Inside:

Workholding is the first thing that changes compared to 3D printing. A print sits on the bed and stays there. Here the bit spins, and spins fast: if the stock isn’t clamped properly it gets thrown around inside the machine, and you can break the bit, the part or both.

Materials and accessories

In the materials and accessories box:

Plus a small materials kit for the first tests:

What was a Kickstarter gift

Some of what I found were rewards tied to the campaign’s stretch goals: the two MDF spoil boards, the spare probe rod, the 6 mm collet with the two adapters, plus a thank-you card. If you buy a Z1 today, these extras aren’t included: the box holds the machine and the tool kit. Keep that in mind when you watch a backer’s unboxing and do your sums.

Spoil boards, explained for 3D printing people

Two MDF panels that sit on the bed. The name means nothing if you come from 3D printing, so here’s what they’re for.

When the cutter finishes cutting a part, it goes a little below the material to free it completely. If the aluminium bed is right underneath, it gets cut. The spoil board is a sacrificial panel: it gets damaged instead of the machine, and when it’s worn out you throw it away and put in a new one. It lasts a great many jobs.

I also found a file to 3D print them, and I’ll try it: if it works, it’s a consumable you can make yourself.

The PCB Fab Kit

This is the part I care about most, because I’ll mainly be using this machine to make circuit boards at home. You’ll hardly see it in any unboxing, because it’s expensive even by Makera’s standards. Inside:

The upshot is the whole process at home. No acids, no ferric chloride, no minimum order and weeks of waiting: you start from a blank, the CNC cuts the traces, then drilling, then mask, and a single prototype is perfectly doable.

The ionizer module

Last but not least. When you machine plastic, the chips pick up static and stick to everything, the walls of the machine included. The ionizer neutralises the charge and solves the problem. I’ll test it in practice like everything else.

First impressions

Packaging and build are excellent. The number of accessories, though, is a bit daunting: every one of them has to be understood before you can use it, on top of the machine itself, and a CNC is not as simple as a 3D printer, not even this one. That’s exactly what Makera is betting on with its software, the thing that earned it the nickname “the Bambu Lab of CNCs”: lowering the barrier for people starting from zero, like me.

That’s why I chose the Z1 as my first CNC rather than one of the cheap ones you find online. Whether it keeps its promise we’ll see in the next videos, with the machine running and the first jobs. In the meantime I’m also working on a small piece of software to help people who only know 3D printing get into CNC.

Why a CNC after years of 3D printing is covered in Makera Z1: my first desktop CNC.

Disclosure: affiliate link, it doesn't change the price for you. The code WML100off gives you €100 off on the Makera store. Makera Z1 · official site